|
Stainless Steel Shim
 |
STAINLESS -
|
301/302/304 FULL HARD
AVAILABLE IN
6" & 12" WIDE COILS
6" X 25" SHEETS
8 X 12" FLAT SHEETS
ALSO AVAILABLE SPECIAL LENGTHS, WIDTHS AND ALLOYS |
| BRASS - |
260 HALF HARD |
| STEEL - |
1010 FULL HARD
6" X 12" WIDE IN 50" & 100" COILS
6" X 25" & 8" X 12" FLAT SHEETS
SPECIAL LENGTHS AND WIDTHS |
Type 301 is an austenitic stainless steel with a composition of 17% chromium and 7% nickel. Its resistance to atmosphere corrosion and its bright surface finish make it an excellent choice for decorative structural applications. Kitchen equipment, automotive components, wheel covers, conveyor belts, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for the versatile grade. Type 301 is resistant to a variety of corrosive media. However, the corrosion properties are not as good as 18-8 chromium-nickel steels. Its susceptibility to carbide precipitation during welding restricts its use in some applications.
Type 302/304 stainless steels are variations of 18% chromium and 8% nickel austenitic alloy. They are the most familiar and used alloy in the stainless steel family and represent nearly half of the total U.S. stainless steel production. These alloys are used in a wide variety of applications including food and beverage equipment, sanitary, cryogenic, and medical. They represent an excellent combination of corrosion resistance and ease of fabrication because of some of the important properties, i.e. high strength with low weight, resistance to oxidation, ease of cleaning, beauty of appearance, prevention of product contamination, good strength and toughness at cryogenic temperatures.
Austenitic stainless steels cannot be hardened by heat treatment.
STAINLESS SHIM — 301/302/304 FULL HARD TEMPER
| PT. NO. |
SIZE |
| SN-X |
.0005 |
| SN-1 |
.001 |
| SN-1X |
.0015 |
| SN-2 |
.002 |
| SN-3 |
.003 |
| SN-4 |
.004 |
| SN-5 |
.005 |
| SN-6 |
.006 |
| SN-7 |
.007 |
| SN-8 |
.008 |
| SN-9 |
.009 |
| SN-10 |
.010 |
| SN-12 |
.012 |
| SN-15 |
.015 |
| SN-20 |
.020 |
| SN-25 |
.025 |
| SN-31 |
.031 | |
| PT. NO. |
SIZE |
| SSN-X |
.0005 |
| SSN-1 |
.001 |
| SSN-1X |
.0015 |
| SSN-2 |
.002 |
| SSN-3 |
.003 |
| SSN-4 |
.004 |
| SSN-5 |
.005 |
| SSN-6 |
.006 |
| SSN-7 |
.007 |
| SSN-8 |
.008 |
| SSN-9 |
.009 |
| SSN-10 |
.010 |
| SSN-12 |
.012 |
| SSN-15 |
.015 |
| SSN-20 |
.020 |
| SSN-25 |
.025 |
| SSN-31 |
.031 | |
| PT. NO. |
SIZE |
| SW-X |
.0005 |
| SW-1 |
.001 |
| SW-1X |
.0015 |
| SW-2 |
.002 |
| SW-3 |
.003 |
| SW-4 |
.004 |
| SW-5 |
.005 |
| SW-6 |
.006 |
| SW-7 |
.007 |
| SW-8 |
.008 |
| SW-9 |
.009 |
| SW-10 |
.010 |
| SW-12 |
.012 |
| SW-15 |
.015 |
| SW-20 |
.020 |
| SW-25 |
.025 |
| SW-31 |
.031 | |
| PT. NO. |
SIZE |
| SSW-X |
.0005 |
| SSW-1 |
.001 |
| SSW-1X |
.0015 |
| SSW-2 |
.002 |
| SSW-3 |
.003 |
| SSW-4 |
.004 |
| SSW-5 |
.005 |
| SSW-6 |
.006 |
| SSW-7 |
.007 |
| SSW-8 |
.008 |
| SSW-9 |
.009 |
| SSW-10 |
.010 |
| SSW-12 |
.012 |
| SSW-15 |
.015 |
| SSW-20 |
.020 |
| SSW-25 |
.025 |
| SSW-31 |
.031 | |
STAINLESS FLAT SHEETS & ASSORTMENTS
ALL SHEETS PRODUCTS ARE INDIVIDUALLY PACKAGED IN CLEAR PLASTIC SLEEVES AND MARKED WITH SIZE
| PT NO |
SIZE |
PT NO |
SIZE |
| SSS-1 |
.001 |
SSS-8 |
.008 |
| SSS-1X |
.0015 |
SSS-9 |
.009 |
| SSS-2 |
.002 |
SSS-10 |
.010 |
| SSS-3 |
.003 |
SSS-12 |
.012 |
| SSS-4 |
.004 |
SSS-15 |
.015 |
| SSS-5 |
.005 |
SSS-20 |
.020 |
| SSS-6 |
.006 |
SSS-25 |
.025 |
| SSS-7 |
.007 |
SSS-31 |
.031 | |
| PT NO |
SIZE |
PT NO |
SIZE |
| FS-1 |
.001 |
FS-8 |
.008 |
| FS-1X |
.0015 |
FS-9 |
.009 |
| FS-2 |
.002 |
FS-10 |
.010 |
| FS-3 |
.003 |
FS-12 |
.012 |
| FS-4 |
.004 |
FS-15 |
.015 |
| FS-5 |
.005 |
FS-20 |
.020 |
| FS-6 |
.006 |
FS-25 |
.025 |
| FS-7 |
.007 |
FS-31 |
.031 | |
| PT NO |
DESCRIPTION |
| FSA-10 |
8" X 12" FLAT SHEETS
1 PC EA OF .001, .002, .003, .004, .005, .007, .010, .015, .020 |
| SA-17 |
6" X 12" FLAT SHEETS
1 PC EA OF .0005 THRU .031 (17 SIZES) | |
| CONTACT US FOR A QUOTE ON ANY SPECIAL SIZES, LENGTHS OR WIDTHS | |
STAINLESS STEEL FLAT SHEETS - TYPE 301, 302, 304
PERFECT FOR LASER, WATERJET AND WIRE CUTTING
 |
STANDARD SIZES -
|
6" X 12"
6" X 25"
8" X 12"
12" X 12"
12" X 24"
|
| |
AVAILABLE IN THICKNESSES .0005 THRU .031
24" X 24"
.002 THRU .031
LARGER SHEETS ALSO AVAILABLE |
TBI is a leading supplier of "photo etch quality" stainless flat sheets to the Laser and Waterjet cutting industry. We offer a wide variety of standard sizes, thicknesses and materials to fit your prototype and production requirements. We can also supply custom sizes to fit your exact bed size and optimize material utilization.
OTHER MATEIRALS AVAILABLE - LOW CARBON STEEL, HIGH CARBON STEEL, TITANIUM, BERYLLIUM COPPER, PHOSPHOR BRONZE, ALUMINUM. |
Home 
